Precision Daphne Concrete

Stamped concrete services in Daphne AL - a patterned slab built on a solid base

Tired of a plain gray patio or driveway? We pour, color, stamp and seal concrete that looks like stone, brick or wood.

A brown stamped concrete patio with a textured stone-block pattern extends along a beige-sided house.
  • Fully licensed and insured.
  • Free quotes on site.
  • We respond within 1 business day.

Stamped concrete for patios, walks and driveways

  • Stamped patios

    A colored slab out back, pressed to look like stone, brick or tile. It suits a space that sees foot traffic, a grill and outdoor furniture.

  • Stamped driveways and walks

    Patterned concrete for the drive or the front walk. The slab and steel are sized for what rolls or walks on it, and the color method has to handle traffic.

What is stamped concrete, and is it right for your patio or driveway?

With stamped concrete services in Daphne, AL, we pour a new patio, walk or driveway, color it, press rubber mats into it while it's still soft so it looks like stone, brick, wood or tile, and then seal it.

Most calls start with a plain gray patio, walk or driveway that someone wants to look like more. If you're starting from bare ground out back, it's the same job as concrete patio construction with color and a pattern on top. The price moves with the size, the pattern, the color method and how much digging the base needs. The schedule turns on any permit questions, the weather and finding a pour day our crew can give the whole job. Your written estimate prices out the main parts so you can see where the money goes and compare it with other bids.

Stamped concrete, from base to sealer

I start with how you'll use the space, because a stamped patio, a concrete sidewalk and the drive up to a garage floor don't need the same slab or the same color method.

  • Dig out and pack the base

    We dig out soft dirt and pack the subgrade, the ground the slab sits on, so the pattern doesn't sink and crack later.

  • Set forms, slope and steel

    We set forms at the right thickness and slope water away from your house, then add rebar, steel that holds the slab together.

  • Pour, color and stamp on time

    We plan the pour day around the short window before the surface sets up, and we bring enough hands to stamp it in time.

  • Cut joints, cure and seal

    We cut control joints, grooves that steer cracks into straight lines, and let the slab cure and harden before we seal it.

Why Daphne homeowners call Precision Daphne Concrete

I've run this business since 2013, and I learned the trade next to older finishers who'd make you redo an edge if it wasn't right. I still care most about what you can't see once it's poured, the base, the drainage and the cure.

  • The person who bids it runs it

    I come out to look at most jobs myself, and our own crew does the work with me running it, so you aren't handed off to strangers on pour day.

  • Fully licensed and insured for home work

    The state Home Builders Licensure Board treats anyone who builds or improves a home for over $10,000 in labor and materials as a home builder, unless the work is outside its reach.

  • The base is the last thing cut

    When a budget gets tight, people want to trim the base because nobody sees it on day one. I'll push back, since a fancy pattern on soft dirt tends to sink.

What happens when you call about stamped concrete in Daphne?

We plan a stamped job around how you'll use the space and around a pour day you know about ahead of time, so you know what's coming before we dig.

or call (251) 572-8074

  1. Call or send the form

    Call (251) 572-8074 or send the contact form, and most of the time it's me who calls you back.

  2. We walk the space

    I look at the ground and where the water runs, and I ask what you'll use the slab for so the plan fits it.

  3. Your written estimate

    You get a written estimate with the main parts priced out. If you hire us, our crew does the pour and we walk the finished job with you.

Concrete sidewalk leading to brick steps and the entrance of a two-story house.

Get a free on-site estimate for your stamped patio, walk or driveway

Tell us the size of the area, whether it's a patio, walkway or driveway, and the look you want. We respond within one business day, usually with me calling back to set up a free on-site estimate with no obligation.

Stamped concrete questions we hear

How much does stamped concrete cost per square foot in Daphne?

Installing a stamped concrete patio across the US usually costs about $24 to $29 per square foot. That's a national figure for patios, not our price. You'll get our price for your space in the written estimate, after I've seen the ground.

What is the best way to color a stamped concrete driveway?

Color hardener is the common choice for driveways, because it forms a harder skin on top that holds up to traffic. Its color lives only in that top layer, though, so deep damage shows the gray underneath, and an uneven application leaves it blotchy. We'll weigh it against integral color with you before the pour.

Is integral color or color hardener better for a stamped patio in Daphne?

For a patio that won't see cars, integral color is often the better fit, because the pigment runs through the whole slab and a chip or saw cut shows the same color as the top. It's the most forgiving choice and ages without pale scars. It won't reach the deepest or brightest tones, though, so if you want a bold color, hardener may be the pick.

What causes stamped concrete to lose its pattern detail?

Stamping too late does it, because a slab worked after the surface sets loses detail, and the only fix then is grinding it off. Concrete placed on hot days sets quicker, so the crew may need to finish faster.

What kind of sealer is best for stamped concrete?

Film-forming sealers, the kind that coat the surface, are the most common choice because they bring out the color. Most also slow moisture loss while the slab cures. Too much sealer, or sealing too soon, can spoil the look, so more isn't better.

How do I know when to reseal stamped concrete?

Reseal when the surface stops shedding water or stains, or when the color loses its depth, not on a set number of years. Resealing is the most common upkeep stamped concrete needs, so keep an eye on how water sits on it after a rain.

Stamped concrete in Daphne starts with permit questions

Daphne's Building Inspection Department issues building permits, and its list names trades like electrical, plumbing and structural work but not stamped concrete. So ask the department before the pour rather than assuming your job is clear. If your work reaches the public strip beside a city street, the city's Public Works Department requires a culvert permit along that strip. For a general building permit, the city's permit requirements ask for the contract showing the job cost, a City of Daphne business license, a plot plan and plans for the new work. They also list an 811 call to mark buried lines where one applies. When a job needs a permit, we help with the paperwork and work with the office that covers your address.

We're based in Daphne and work in Mobile, across Baldwin County and in the cities around them, including Fairhope. The calls look about the same everywhere, mostly patios and front walks people want to look like more than plain gray, so every plan starts with how you'll use the slab and where the water goes.